Post Offer Free
GSD Industrial Co., Ltd.  

Gold Index: 7203

You are here: home  > High Performance Roots Type Blower For Sewage Treatment Plant Bend Compact Design
  • High Performance Roots Type Blower For Sewage Treatment Plant Bend Compact Design
  • High Performance Roots Type Blower For Sewage Treatment Plant Bend Compact Design
Enlarge High Performance Roots Type Blower For Sewage Treatment Plant Bend Compact Design

High Performance Roots Type Blower For Sewage Treatment Plant Bend Compact Design 

Place of Origin: Taiwan, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: HRB

High Performance Roots Type Blower For Sewage Treatment Plant Bend Compact Design  <span style="color:rgb(51, 51,

High Performance Roots Type Blower For Sewage Treatment Plant Bend Compact Design
 
 
Blower Operation Precautions:
1. After pressure adjustment and the running is normal, pressure meter can be turned off, for extending the service life of pressure meter. In case that new pressure inspection is required, pressure meter switch should be turned on slowly, to avoid any damage to pressure meter due to instant impact.
2.  Blower is widely used in the industries of cement, chemical industry, fertilizer, melting, sewage treatment, aquiculture, electrical power, city coal gas, gas transportation etc.. Compared with centrifugal blower, Root’s blower features forceful air blow. In case of pressure change, flow rate change of centrifugal blower is very large, but that of Root’s blower is very little. Correct selection of blower type according to the nature of media transported, flow rate and the pressure required in process flow, can not only guarantee use requirements, but also reduce operating failure rate of blower.
 
Application:

  • Vacuum dehydration for dying, paper industry;
  • Ventilation, desolates, Environment caring;
  • Exhausting and drying, Air transportation;
  • Gas, bulk conveyance, Aquarium;
  • Conveyance by air, Liquid agitation;

 
Features:

  • Delivers completely oil-free air.
  • Low oscillation and low noise by complete balancing.
  • Small change in capacity against change in pressure.
  • High efficiency due to special profile.
  • Simple structure, free from trouble.
  • Highest quality pilot & Accurate great applied, long life and low noise assured.
  • Standardized product with strict quality control.
  • Our rotor has used the most advanced-one time for all working process of the Four-Shaft method, to enhance the precision of leave wheel.

 
Blower Operation Precautions:
In order to guarantee normal and safe operation of blower, the operator should carefully read and understand the product operation instruction before going on the duty, and do all inspections and preparations according to requirements of operation instruction; Operation procedure should not be started until everything is confirmed normal. During the operation, running condition of blower should be observed regularly, once abnormal phenomenon is found, stoppage and inspection should be executed at once.
 
Material Construction:

NO.NameMaterial
GB
1CasingHT250
2Bearing housingHT250
3Oil boxHT250
4Oil splashQ235
5Bearing washerQ235
6Framework oil sealNBR
7PulleyHT250
8Drive motorHT250
9Driven rotorHT250
10V-ringNBR
11BearingGCr15
12Gear20CrMnTi
13Lock washerQ235
14Lock nut45
15Gear boxHT250
16Lubrication plug45
17Purge plug45
18Oil gaugeAssembly

 
Job references:
 

 
GSD Work shop:

 
Trouble Shooting:

Insufficient air flow1. Increased clearance caused by the abrasion of impeller and body.1. Replace worn-out parts.
2. Certain change of matching clearance.2. Adjust according to requirements.
3. System leakage.3. Remove after checking.
Air exhaust pressure rise1. The valve is not opened or opened too little.1. Open the valve sufficiently.
2. Too much air amount, due to faster rotation speed.2. Slow down the speed.
3. Filter cartridges of inlet filter van has been blocked.3. Clean up the solid.
Blower not running1. Foreign object in blower.1.Disassemble to clear.
2. The belt is loose and slipping.2. Adjust belt tension.
3. Motor fault.3. Overhaul or replace the motor.
4. Resistance of blower inlet piping is too high.4. Remove piping obturator and
bigPhoto
 Mr. Ms. Emma Huang

Tel: 86-21-50550317
Contact to this supplier

Related Search

High Performance Butterfly Valve    Oil Treatment Plant    Water Treatment Plant    Effluent Treatment Plant    Pure Water Treatment Plant    Roots Blowers    More>>

Find more related products in following catalogs on Hisupplier.com

Electronic & Electrical >> Electronics Designing & Processing

Company Info

GSD Industrial Co., Ltd. [China (Mainland)]


Business Type:Manufacturer
City: Shanghai
Province/State: Shanghai
Country/Region: China (Mainland)

View Contact Details

You May Like:

Product (145)