Energy Saving Simple High Pressure Roots Blower Efficiency Capacity Calculation 157 m3/min TRS manufacturer from China GSD Industrial Co., Ltd.

Place of Origin:

Zhejiang, China (Mainland)

Product Detail

Model No.: TRS

Energy Saving Simple High Pressure Roots Blower Efficiency Capacity Calculation 157 m3/min

<span sty

Energy Saving Simple High Pressure Roots Blower Efficiency Capacity Calculation 157 m3/min

Applications:

1	Equipment of dust collection;
2	Vacuum dehydration for dying, paper industry;
3	Ventilation, desolates, Environment caring;
4	Exhausting and drying, Air transportation;
5	Gas, bulk conveyance, Aquarium;
6	Aeration of sewage
7	Clean up the bottle's dead angle by gas
8	Use gas spraying fire-resistant material on the wall
9	Increasing oxygen in water
10	Used for combustion, increasing oxygen to promote combustion
11	Increasing oxygen to promote the fermentation
12	Use washing fluid washing car base on siphon principle
13	The mechanical arm carrys the paper after it has been rised by the wind
14	Use gas blowing sand to flush pipes
15	Stir gas liquid, make its uniformity
16	Do body massage, promote the blood circulation
17	Use gas conveying materials

Feature:

1	Wide range of capacity and pressure. Calibre: 50mm-300mm (2 "-12") Capacity: RSW 2.5~171.1m3/minTRS 1.14~166.49m3/min Pressure: The pressure of one-stage RSW type up to 10000mmAq (1.0kgf/cm2) The pressure of two-stage TRS type up to 20000mmAq (2.0kg/cm2)
2	Delivers completely oil-free air.
3	Low oscillation and low noise by dynamic balance whichrevised by computer.
4	Smaller change in capacity against change in pressure.
5	High efficiency due to special impeller design, great air-delivery low power.
6	Simpler and solider structure, less trouble.
7	Highest quality pilot & accurate great applied, long life and low noise assured.
8	Standardized product with strict quality control.
9	Our rotor has used the most advanced technic, one time for all working process of the six-shaft method, to enhance the precision of leave wheel.
10	The special cooling design can efficiently reduce the temperature of the lubricate oil in the oil box and gear case, and then make sure the blower’s gear and shaft having a long service life operating under a high pressure.
11	TRS is a two-stage blowers in series, through two times pressurize,the air in the blower can get a high pressure. Through the condenser’s cooling system, the air discharged from the one-stage blows outlet can be efficiently cooling down, the temperature of the air at the suction inlet of the second stage blower can be below 40, which can make sure the regular operation of the second stage blower.

Construction: