Non Clog Submersible Vortex Pump Mechanical Seal For Waste Water Treatment DP manufacturer from China GSD Industrial Co., Ltd.

Non Clog Submersible Vortex Pump Mechanical Seal For Waste Water Treatment

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: DP

Non Clog Submersible Vortex Pump Mechanical Seal For Waste Water Treatment App

Non Clog Submersible Vortex Pump Mechanical Seal For Waste Water Treatment

Application

1	Cabin ponding .
2	Waste water drainage.
3	The based of building drainage equipment and sewer drainage works.

Features

1	Able to transfer liquid with modicum air.
2	The application of liquid temperature: 0~40
3	Mechanical seal: DN50: 1 mechanical seal (double-end); DN80: 2 mechanical seal (single-end); Material:Silicon.
4	Squirrel-cage motor

DP Structure

NO.	Name	Material
NO.	Name	GB	JIS
1	Handle	Q235	SS40
2	Motor cover	HT200	FC200
3	O-ring	NBR	NBR
4	Bearing	-	-
5	Rotor	-	-
6	Shaft	3Cr13	SUS420J2
7	Bearing	-	-
8	Bracket	HT200	FC200
9	Mechanical seal	SiC-SiC	SiC-SiC
10	Impeller	HT200	FC200
11	Pump casing	HT200	FC200
12	Oil cover	HT200	FC200
13	O-ring	NBR	NBR
14	Stator	-	-
15	Motor casing	HT200	FC200
16	Cable	-	-

Performance parameters:

Type					Pump				Weight kg
	hp	Phase	Pole	Fre.	Dia	Head	Capacity
	hp	Phase	Pole	Hz	mm	m	L/min	m³/h
DP51.5-50	2	3	2	50	50	14.3	200	12	28
DP51.5-80	2	3	2	50	80	7.5	500	30	36
DP52.2-80	3	3	2	50	80	11.5	550	33	52
DP53.7-80	5	3	2	50	80	16.7	600	36	60

Control method:

The power cable of pump is three-phase and four-wire, a power cable is marked with the label of U1, V1 and W1;in case of two power cables, one is marked with U1, V1 and W1, the other is marked with U2, V2and W2, the ground wire is double-color, and marked with thesign.
If three-phase circuit in the electric cabinet is arranged according to national standard of GB2681, with the definite phase sequence, namely, if the U, V and W in the circuit figure are definite, the wiring connection as shown in the above figure can be implemented, which can enable the pump to clockwise rotate.
If the phase sequence of three-phase power supply in the electric cabinet is indefinite, it should correct the power wire of the pump to the three-phase power supply prior to the installation of the pump, with the connection of flexible cord with the PE ground protective wire, and check whether the pump is in normal operation or not by means of trial run.
During the test, correct rotation direction should accord with rotation mark, if the rotation direction is not correct, change connection position of any two phrases among three phrases, then it can rotate positively.
Trial operation will last about five seconds, and be implemented under conditions lack of water, with keeping time spent to the minimum, so as not to damage the mechanical seal of the pump.
Work shop: