Electric Submersible Non Clog Sewage Pump For Industrial Waste Water Treatment DP manufacturer from China GSD Industrial Co., Ltd.

Electric Submersible Non Clog Sewage Pump For Industrial Waste Water Treatment

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: DP

Electric Submersible Non Clog Sewage Pump For Industrial Waste Water Treatment <b

Electric Submersible Non Clog Sewage Pump For Industrial Waste Water Treatment

Application:

1	Waste water drainage.
2	The based of building drainage equipment and sewer drainage works.
3	Civil and architectural engineering construction.

Feature:

1	Mechanical seal: DN50: 1 mechanical seal (double-end); DN80: 2 mechanical seal (single-end); Material:Silicon.
2	Squirrel-cage motor
3	Induction motor are F class insulation
4	motor protection grand is IP68.

Construction:

NO.	Accessory name	Material
NO.	Accessory name	<GB>	<JIS>
1	Handle	Q235	SS40
2	Motor cover	HT200	FC200
3	O-ring	NBR	NBR
4	Bearing	-	-
5	Rotor	-	-
6	Shaft	3Cr13	SUS420J2
7	Bearing	-	-
8	Bracket	HT200	FC200
9	Mechanical seal	SiC-SiC	SiC-SiC
10	Impeller	HT200	FC200
11	Pump casing	HT200	FC200
12	Oil cover	HT200	FC200
13	O-ring	NBR	NBR
14	Stator	-	-
15	Motor casing	HT200	FC200
16	Cable	-	-

Performance parameters:

Type	Motor					Pump					Weight kg
	kW	hp	Phase	Pole	Fre.	Dia		Head	Capacity
	kW	hp	Phase	Pole	Hz	mm	in	m	L/min	m³/h
DP51.5-50	1.5	2	3	2	50	50	2‘’	14.3	200	12	28
DP51.5-80	1.5	2	3	2	50	80	3‘’	7.5	500	30	36
DP52.2-80	2.2	3	3	2	50	80	3‘’	11.5	550	33	52
DP53.7-80	3.7	5	3	2	50	80	3‘’	16.7	600	36	60

Points for attention before starting equipment:
1. Check whether the power and the voltage frequency used are same with those listed on the label.
2. Before installation, check the rotation direction of the motor, the correction rotation direction is that the motor rotates counter-close seen from the suction direction of the impeller. If the rotation direction is not right, the connection positions of any two phases in three phases shall be shifted to get it rotate in a correct direction.
3. Check whether the operation of the level controller is in normal so as not to affect the service life of the submersible motor.
4. Operation without water is prohibited.
5. Lifting and hanging the motor with the motor cable is prohibited during the transport and installation processes.
Attention: The protective grade of the motor of CP and SP submerged pump is IP68, which has a very strict assembly requirement, therefore, it is recommended to have the assembling and maintaining work done after returned to the factory. The following procedures shall be abided by when on-site maintenance work is conducted.

Work shop: