High Precision Rotary Lobe Small Roots Blower Capacity Calculation 413 m3/min
| Place of Origin: | Taiwan, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
High Precision Rotary Lobe Small Roots Blower Capacity Calculation 413 m3/min
<spa
High Precision Rotary Lobe Small Roots Blower Capacity Calculation 413 m3/min
Notes for Specification Table:
1. The inlet air capacity can be converted as following.
273+T2
Q2= Q1 x —— x ———
273+T1
Q1: Air capacity (m3/min) based on absolute pressure
P1(mmAq) and temperature T1()
Q2: Air capacity (m3/min) based on absolute pressure
P2(mmAq) and temperature T2()
2. The motor power is 1.1~1.3 multiple of shaft power.
3. The error of the parameter is about 5%.
Convertion Table:
| PRESSURE atm | atm | kPa | bar | Ibt/in2(psi) | kgf/cm2 | inHg | ftAq | mmHg(Torr) | mmAq |
| atm | 1 | 101.325 | 1.01325 | 14.696 | 1.0333 | 29.921 | 33.914 | 760 | 10333 |
| kPa | 0.0099 | 1 | 0.01 | 0.145 | 0.0102 | 0.295 | 0.335 | 7.5 | 102 |
| bar | 0.9869 | 100 | 1 | 14.504 | 1.0198 | 29.53 | 33.47 | 750 | 10198 |
| Ibt/in2(psi) | 0.068 | 6.894 | 0.0689 | 1 | 0.0703 | 2.036 | 2.308 | 51.71 | 703 |
| kgf/cm2 | 0.968 | 98.062 | 0.981 | 14.228 | 1 | 28.96 | 32.82 | 735.53 | 10000 |
| inHg | 0.0334 | 3.3863 | 0.0339 | 0.491 | 0.0345 | 1 | 1.133 | 25.4 | 345.3 |
| ftAq | 0.0295 | 2.99 | 0.0299 | 0.434 | 0.0305 | 0.882 | 1 | 22.42 | 304.8 |
| mmHg(Torr) | 0.013 | 0.1338 | 0.00138 | 0.019 | 0.0014 | 0.04 | 0.045 | 1 | 13.6 |
| mmAq | 0.000097 | 0.0098 | 0.000098 | 0.0014 | 0.0001 | 0.003 | 0.0033 | 0.074 | 1 |
Blower Operation Precautions:
1. In order to guarantee normal and safe operation of blower, the operator should carefully read and understand the product operation instruction before going on the duty, and do all inspections and preparations according to requirements of operation instruction; Operation procedure should not be started until everything is confirmed normal. During the operation, running condition of blower should be observed regularly, once abnormal phenomenon is found, stoppage and inspection should be executed at once.
2. Troubleshooting should be carried out after stoppage and the power is cut off, the personnel not in charge of the position are prohibited from operating the blower. Generally running clearance of blower is adjusted well during manufacturing assembly, thus the user needn’t readjust and should be carefully for disassembly of important part.
3. The maintenance should be done by professional technician, and executed according to overhaul requirement and safe operation rules strictly.
Application:
- Waste water treatment;Dust collecting after burning;
- Equipment of dust collection;
- Exhausting and drying, Air transportation;
- Gas, bulk conveyance, Aquarium;
- Conveyance by air, Liquid agitation;
Features:
- Capacity, Pressure and Vacuum range; Outlet: 40mm-300mm(1.5 "-12"); Capacity: 0.6-160m3/min(21-5700CFM); Pressure: 1000mmAq-8000mmAq
- One-Stage GRB type 8000mmAq(0.8kgf/cm2)
- Small change in capacity against change in pressure.
- High efficiency due to special profile.
- Simple structure, free from trouble.
- Highest quality pilot & Accurate great applied, long life and low noise assured.
- Standardized product with strict quality control.
- Our rotor has used the most advanced-one time for all working process of the Four-Shaft method, to enhance the precision of leave wheel.
Material Construction:
