Submersible Hyperboloid Wastewater Mixers With Big Surface Area Impeller MH manufacturer from China GSD Industrial Co., Ltd.

Submersible Hyperboloid Wastewater Mixers With Big Surface Area Impeller

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: MH

Submersible Hyperboloid Wastewater Mixers With Big Surface Area Impeller

<span style="color:rgb(5

Submersible Hyperboloid Wastewater Mixers With Big Surface Area Impeller

Features:

1. In comparison with traditional blade-paddle mixer, MH has the feature of mixing equality, high efficiency,

2. Big surface area impeller, equipped with small power, saving energy.

3. The density of the media shall not exceed 1150 kg/m³

4. According to the medium and pond form,the mixer's power and speed could be adjusted.

Application:

Hyperboloid mixers are widely applied in environmental protection, chemistry, energy and light industry where the solid, liquid and gas are interflowing, especially in the sewage treatment process of coagulative precipitation tank, equalization pond, anaerobic pond, nitration pond, and denitrifying pond.If the mixer is dry type installation, it's especial suit for the environment with high temperature, high concentration and corrosive liquid.

Model Description:

MH – 500 – 76 – 1.1 – Q

MH:Hyperboloid mixer

500:Diameter of impeller (mm)

76:Speed (r/min)

1.1:Power (kW)

Q:Submersible type

Construction:

Hyperboloid agitator can be divided into dry-type and submersible-type according to the installation mode.

MH hyperboloid mixer for anoxic anaerobic tank

Performance parameters:

TYPE	Impeller diameter	Speed(r/min)		Power(kW)		Weight (kg)
TYPE	Impeller diameter	Standard	Range	Standard	Range	Weight (kg)
MH	500	76	40-250	1.1	0.75-1.5	320
	1000	55	30-80	1.5	1.1-2.2	480
	1500	38	30-60	2.2	1.5-3	510
	2000	33	20-42	3	2.2-3	560
	2500	27	20-40	5.5	3-5.5	640
	2800	24	20-30	7.5	4-7.5	860

Service & Maintenance:

It is required to replace gear lubricating oil and clean up the inside oil contamination after the new motor has operated for 200 to 300 hours. You can replace them later within six months to one year.

Please refer to the manufacturer’s operating manual for the use method of gear motor.

Check the motor insulation when the device does not work for long time before turn it on again, while pay attention to preventing motor and impeller damage caused by difficulty in starting due to long sedimentation of sediment.

Make a record while doing the above checks, and contact with the Company if any abnormal situation occurs.

Project reference( wastewater treatment plant) :