Outdoor / Indoor Three Lobe Roots Style Blower Electric Vertical For Incinerator
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Outdoor / Indoor Three Lobe Roots Style Blower Electric Vertical For Incinerator
<
Outdoor / Indoor Three Lobe Roots Style Blower Electric Vertical For Incinerator
Applications:
- Waste water treatment system
- Oxygenating and aeration
- Flue gas desulfurization
- Use gas spraying fire-resistant material on the wall
- Aeration of sewage
- Clean up the bottle's dead angle by gas
Product Features:
- GRB is a displacement blower, the pressure can be adjusted according to the requirement of the user in allowing range
- There are two impellers in the blower body which rotate in the opposite direction
- There are some tiny gap between the impeller to body, impeller to impeller which ensures the impeller rotate
- NTN bearing(NSK,KOYO or equal quality brand), single cover plate, self-sealing, made from SUJ2 (GCr15), long service life(30000hrs designed service life),stable and reliable quality
- The seal holder use rubber framework oil seal and all other seals are V type
- The thickness of oil splash is designed only 2.0mm with higher intensity and superior service life
Material & Structure Construction:
| NO. | Accessories |
| 1 | Blower body |
| 2 | Motor |
| 3 | Foundation |
| 4 | Pulley |
| 5 | Driving belt |
| 6 | Belt Cover |
| 7 | Suction silencer |
| 8 | Rain cover |
| 9 | Check valve |
| 10 | Gauge Pipe |
| 11 | Outlet pressure gauge |
| 12 | T-joint |
| 13 | Relief valve |
| 14 | Outlet silencer |
| No. | Name | Material |
| JIS | ||
| 1 | Casing | FC250 |
| 2 | Bearing housing | FC250 |
| 3 | Oil box | FC250 |
| 4 | Oil splash | SS400 |
| 5 | Bearing washer | SS400 |
| 6 | Framework oil seal | Viton |
| 7 | Pulley | FC250 |
| 8 | Drive rotor | FC250 |
| 9 | Driven rotor | FC250 |
| 10 | V-ring | Viton |
| 11 | Bearing | SUJ2 |
| 12 | Gear | 20CrMnTi |
| 13 | Lock washer | SS400 |
| 14 | Lock nut | S45C |
| 15 | Gear box | FC250 |
| 16 | Lubrication plug | S45C |
| 17 | Purge plug | Assembly |
| 18 | oil gauge | S45C |
Installation of air blower unit
Clean the surface of the base concrete, and check whether the base meets the precision requirements according to the following table
| No. | Deviation name | Deviation value (mm) | No. | Deviation name | Deviation value (mm) |
|
1 |
Pre-embedded ground bolt: Elevation (top) Center distance (measured at bottom and top) |
+5 -0 ±2 |
5 |
Preformed hole for ground bolt: Central position Depth Plumb straightness of hole wall |
±10 ±20
GSD Industrial Co., Ltd. [China (Mainland)]
Business Type:Manufacturer |
