Semi Open Impeller Non Clog Sewage Pump High Head Capacity 60 m/h DP manufacturer from China GSD Industrial Co., Ltd.

Semi Open Impeller Non Clog Sewage Pump High Head Capacity 60 m/h

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: DP

Semi Open Impeller Non Clog Sewage Pump High Head Capacity 60 m³/h Appli

Semi Open Impeller Non Clog Sewage Pump High Head Capacity 60 m³/h

Application:

1	Farm irrigation .
2	Pasturage drainage.
3	Waste water drainage.

Features:

1	Excellent semi-open impeller.
2	The impeller will generate vortex flow.
3	Able to transfer liquid with modicum air.
4	The application of liquid temperature: 0~40

Pump structure & material:

NO.	Description	Material
NO.	Description	GB	JIS
1	Handle	Q235	SS40
2	Motor cover	HT200	FC200
3	O-ring	NBR	NBR
4	Bearing	-	-
5	Rotor	-	-
6	Shaft	3Cr13	SUS420J2
7	Bearing	-	-
8	Bracket	HT200	FC200
9	Mechanical seal	SiC-SiC	SiC-SiC
10	Impeller	HT200	FC200
11	Pump casing	HT200	FC200
12	Oil cover	HT200	FC200
13	O-ring	NBR	NBR
14	Stator	-	-
15	Motor casing	HT200	FC200
16	Cable	-	-

Performance parameters:

Type	Motor					Pump				Weight kg
	kW	hp	Phase	Pole	Fre.	Dia		Head
	kW	hp	Phase	Pole	Hz	mm	in	m	m³/h
DP51.5-50	1.5	2	3	2	50	50	2‘’	14.3	12	28
DP51.5-80	1.5	2	3	2	50	80	3‘’	7.5	30	36
DP52.2-80	2.2	3	3	2	50	80	3‘’	11.5	33	52
DP53.7-80	3.7	5	3	2	50	80	3‘’	16.7	36	60

Installation of water pumps:
Installation requirements:
a. Confirm whether the size of the inlet is appropriate before installation.
b. The outlet of the cable shall be preset for wiring; the cable shall be mounted properly after the installation of the pump is finished.
c. The distance from the pump inlet to the tank wall shall be over 50cm at least.
d. The weight of the outlet pipeline shall not press on the pump, it shall be supported and mounted properly.
e. Check whether the voltage and frequency conforms to the mark on the nameplate before the installation of the pump.
f. Do not change the cable length randomly, and do not submerge the cable joint into water.
g. Cables and chains shall be fixed respectively so as to avoid the cable from being damaged due to pull when lifting the pump.
h. The float switch of the level control shall be installed to make the pump operate automatically and to ensure the height of the water in the tank not lower than water lever safety line. The float device shall not be close to the inlet of the tank water to ensure stable operation of the pump.

Work site: