Closed Impeller Stainless Steel Circulation Pump 2900 Rpm For Waste Supplying System GPS manufacturer from China GSD Industrial Co., Ltd.

Closed Impeller Stainless Steel Circulation Pump 2900 Rpm For Waste Supplying System

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: GPS

Closed Impeller Stainless Steel Circulation Pump 2900 Rpm For Waste Supplying System
<

Closed Impeller Stainless Steel Circulation Pump 2900 Rpm For Waste Supplying System

Application

1. Air-condition cold or hot water circulation.

2. Installed together with other equipment

3. For Industrial water supply

Features

1. The optimal hydraulic model is used for impeller; the pump is of an utmost dynamic-static balance and reliable performance.

2. Shaft is an extended one from the motor, so the concentricity is absolutely reliable.

3. Supported by imported bearing, runs at little vibration and low noise.

4. Single-stage single-suction horizontal centrifugal pump, closed impeller .

5. Coaxial volute structure, high efficiency

6. Mechanical seal, no damage to shaft, no leakage, long duration.

Maintenance during operation

1. The inlet pipes must be full of liquid, and the pump is not be allowed to work for a long term under the cavitation erosion conditions.

2. Check the current value of the motor regularly. The current value should not exceed the rated current of the motor.

3. After the pump running for a long term, the noise and vibration of the unit are increasing due to mechanical wear, it should be stopped for inspection, and when it’s necessary, the wearing parts and bearings can be replaced. The overhaul period of unit is generally one year.

Construction

No.	Name	Material
No.	Name	GB	JIS
1	Shaft	1Cr13	SUS410
2	Bracket	HT200	FC200
3	Pump casing	HT200	FC200
4	Plug	Q215A	SS34(SS330)
5	O-ring	NBR	NBR
6	Mechanical seal	C/AL₂O₃	C/AL₂O₃
7	Impeller	HT200	FC200
8	Key	45	S45C
9	Feet	HT2500/Q215A	FC200/SS34(SS330)
10	Motor